Just glad to be here.

New User Post Area. New User Please Follow the Rule Post Here First.

Moderators: e292644, blueeyedwolf

Post Reply
Footastic02
I
Posts: 1
Joined: Tue Aug 18, 2020 3:49 am
Country: USA
Location: IN

Just glad to be here.

Post by Footastic02 » Tue Aug 18, 2020 4:11 am

Hey there! Kinna early for me to post since I just ordered my first T91 upper last night. I do have one other piston driven gun. (PLR-16) I plan on milling an 80 lower for this piece. Just here to gather good info from those who know this setup really well. I always appreciate it when people share info gained from real experiences.
I ordered a 14.5" because that's all I could find available at the moment. I have tons of questions before I buy everything else I need. I like that the Galil Ace and the Brownells 180S upper can operate without a buffer and the stock/brace folded....option here or hell no? Is a binary trigger possible?
See...T91 newbie stuff. Not really looking to make a specific clone, just something fun and different.
I've got a clean canvas here and want to do it right. I'll poke around for a bit for the info I need, but plz feel free to give me your .02!
Thanks!!

User avatar
Arkane
C
Posts: 150
Joined: Tue Jun 20, 2017 12:35 pm

Re: Just glad to be here.

Post by Arkane » Tue Aug 18, 2020 1:51 pm

The lower is entirely 100% AR, so aftermarket triggers, split/folding recoil systems,. etc. will work with it. .

neoghost
II
Posts: 19
Joined: Sun Aug 16, 2020 12:10 am
Country: USA
Location: FL

Re: Just glad to be here.

Post by neoghost » Wed Aug 19, 2020 2:53 am

Welcome to the new T91 owners club!

Post Reply