My first step to clone the T91

Moderators: blueeyedwolf, e292644

User avatar
firearms
II
Posts: 28
Joined: Thu May 11, 2017 8:28 pm

Fri May 12, 2017 10:25 am

Here are some parts I have, they are WE parts from Taiwan for those who are interested. They fit well and appear to be sturdy. The stock will fit the 1.18" commercial tube. The castle nut fits both. I'll try these out this weekend and report back it these parts stands up to the real live fire.
http://www.wemodel.com.tw/ugC_ShowroomI ... owKindID=4
I have some more stuff coming.
Image


User avatar
e292644
Site Admin
Posts: 388
Joined: Thu Apr 20, 2017 5:47 pm
Country: USA
Location: AZ
Contact:

Fri May 12, 2017 10:48 am

Cool, can't wait to see your clone.
I do too will receive mil spec parts in the next few days(I hope) and I will post on the home page once its available.
User avatar
Arkane
C
Posts: 123
Joined: Tue Jun 20, 2017 12:35 pm

Tue Jun 20, 2017 4:20 pm

Nice. Is that a custom engraved 80% in the mix?
User avatar
firearms
II
Posts: 28
Joined: Thu May 11, 2017 8:28 pm

Wed Jun 21, 2017 10:01 am

It's only a mark-up, I have yet to complete the receiver. I intend to complete a few receivers and have them engrave at the same time.
User avatar
Arkane
C
Posts: 123
Joined: Tue Jun 20, 2017 12:35 pm

Mon Jun 26, 2017 9:29 pm

Quick question: Is there a spot on that castle nut to stake the rear plate?
User avatar
firearms
II
Posts: 28
Joined: Thu May 11, 2017 8:28 pm

Tue Jun 27, 2017 9:41 pm

It only has 3 holes, I suppse that you can stake one or more of the holes indside. However, the regular AR castle nut will fit the buffer tube if you choose to use a regular castle nut, the thread is the same but the tube is the AR commercial spec. I measure 1.188". It is also interesting that the 3 positions tube is exactly the same as the CAR-15 length wise.
2.jpg
1.jpg
You do not have the required permissions to view the files attached to this post.
User avatar
Arkane
C
Posts: 123
Joined: Tue Jun 20, 2017 12:35 pm

Wed Jun 28, 2017 10:26 am

It's interesting that there is no provision to stake the castle nut on the plate side, I'm curious if the ROC armorers torque it to a certain spec or use some kind of non-permanent locking compound like loctite blue.
User avatar
Bert1977
II
Posts: 9
Joined: Wed Apr 26, 2017 2:34 pm

Thu Jun 29, 2017 1:49 am

Does anyone know if wolf is offering the upper with the correct fsb yet? I had a lower done a couple months ago after they said they will be offering it in the correct set up. Just got bussy with other projects but now looking at finishing this one.
User avatar
Arkane
C
Posts: 123
Joined: Tue Jun 20, 2017 12:35 pm

Thu Jun 29, 2017 11:18 am

Bert1977 wrote:
Thu Jun 29, 2017 1:49 am
Does anyone know if wolf is offering the upper with the correct fsb yet? I had a lower done a couple months ago after they said they will be offering it in the correct set up. Just got bussy with other projects but now looking at finishing this one.
Not yet, the current crop still has the S FSB and wrong flash hider.
User avatar
firearms
II
Posts: 28
Joined: Thu May 11, 2017 8:28 pm

Thu Jul 06, 2017 9:48 am

Start working on the lower.
start.jpg
You do not have the required permissions to view the files attached to this post.
Post Reply