Quick fix for Wolf A1 m-lok/keymod handguard

Moderators: e292644, blueeyedwolf

Post Reply
User avatar
e292644
Site Admin
Posts: 424
Joined: Thu Apr 20, 2017 5:47 pm
Country: USA
Location: AZ
Contact:

Quick fix for Wolf A1 m-lok/keymod handguard

Post by e292644 » Tue Jan 12, 2021 10:25 am

This was from one of our customer Daniel who purchased a Keymod handguard and found a way to secure it tight:

"This is very basic and none of the measurements are really critical except the thickness of the material. I used .014 shim stock, that can be purchased from MSC, most auto parts stores and maybe places like Harbor Freight. I imagine the thickness needed could vary depending on the tolerances Wolf holds on their gas block but .014” worked perfect on mine. I hope this helps."

IMG_0195.jpg
IMG_0194.jpg
IMG_0193.jpg
IMG_0192.jpg
You do not have the required permissions to view the files attached to this post.

Qwerty
II
Posts: 40
Joined: Thu Jun 01, 2017 6:26 am

Re: Quick fix for Wolf A1 m-lok/keymod handguard

Post by Qwerty » Fri Jan 22, 2021 6:07 am

Thanks for sharing!

Post Reply