Page 1 of 1

Quick fix for Wolf A1 m-lok/keymod handguard

Posted: Tue Jan 12, 2021 10:25 am
by e292644
This was from one of our customer Daniel who purchased a Keymod handguard and found a way to secure it tight:

"This is very basic and none of the measurements are really critical except the thickness of the material. I used .014 shim stock, that can be purchased from MSC, most auto parts stores and maybe places like Harbor Freight. I imagine the thickness needed could vary depending on the tolerances Wolf holds on their gas block but .014” worked perfect on mine. I hope this helps."

IMG_0195.jpg
IMG_0194.jpg
IMG_0193.jpg
IMG_0192.jpg

Re: Quick fix for Wolf A1 m-lok/keymod handguard

Posted: Fri Jan 22, 2021 6:07 am
by Qwerty
Thanks for sharing!