T91 Mil-Spec --- Coming Soon!

Moderators: e292644, blueeyedwolf

User avatar
SS73
II
Posts: 9
Joined: Thu Feb 13, 2020 8:14 pm
Country: USA
Location: Va

Thu Feb 13, 2020 9:19 pm

Any updates on availability of heavy barrel 14.5 w/ pin and welded muzzle device to make 16” ?


User avatar
e292644
Site Admin
Posts: 419
Joined: Thu Apr 20, 2017 5:47 pm
Country: USA
Location: AZ
Contact:

Fri Feb 14, 2020 4:28 pm

Will update here soon!
SS73 wrote:
Thu Feb 13, 2020 9:19 pm
Any updates on availability of heavy barrel 14.5 w/ pin and welded muzzle device to make 16” ?
User avatar
Airman Skitters
II
Posts: 6
Joined: Sat Nov 11, 2017 5:56 am

Sat Feb 15, 2020 12:24 pm

I'm sure it's been mentioned before, but I'd like to clarify.

The actual Mip-Spec T91's in service with ROC Forces use a light weight profile barrel with a length of around 14-15", correct?

All of the images I've seen appear to suggest as much. The 14.5 Wolf A1 Upper I have has the heavy barrel and I was looking to have it profiled down, the 15mm Mil-Spec FSB/GB installed and the F/H permanently attached for NFA-Avoidance purposes.

If so, I'd be very, much like SS73, in the market for a 14.5" Upper with the F/H Pinned.

I take it, This Guy would be correct with the F/H Permanently Attached to accurately clone the T91's in service today? I just want the most correct reproduction available.

You might offer the Pin+Weld Option as a drop down or something with the 14.5 Upper if there's enough interest.
User avatar
Firebolt1176
I
Posts: 4
Joined: Wed Sep 18, 2019 1:32 am
Country: USA
Location: California

Thu Mar 12, 2020 8:47 pm

I see that the uppers are in stock - any plans to release the proper T91 roll-marked lowers as well in the future?

Also, do you know roughly when you'll restock the T91 bayonet and carry handle?
User avatar
e292644
Site Admin
Posts: 419
Joined: Thu Apr 20, 2017 5:47 pm
Country: USA
Location: AZ
Contact:

Thu Mar 12, 2020 9:02 pm

It's available now.
MIL-SPEC 15mm T91 barrel assembly and Complete Upper with pinned and welded flash hider.
Airman Skitters wrote:
Sat Feb 15, 2020 12:24 pm
I'm sure it's been mentioned before, but I'd like to clarify.

The actual Mip-Spec T91's in service with ROC Forces use a light weight profile barrel with a length of around 14-15", correct?

All of the images I've seen appear to suggest as much. The 14.5 Wolf A1 Upper I have has the heavy barrel and I was looking to have it profiled down, the 15mm Mil-Spec FSB/GB installed and the F/H permanently attached for NFA-Avoidance purposes.

If so, I'd be very, much like SS73, in the market for a 14.5" Upper with the F/H Pinned.

I take it, This Guy would be correct with the F/H Permanently Attached to accurately clone the T91's in service today? I just want the most correct reproduction available.

You might offer the Pin+Weld Option as a drop down or something with the 14.5 Upper if there's enough interest.
User avatar
e292644
Site Admin
Posts: 419
Joined: Thu Apr 20, 2017 5:47 pm
Country: USA
Location: AZ
Contact:

Thu Mar 12, 2020 9:04 pm

Working to get the lower receiver as we speak. Still need some wait time.
All out of stock parts are on order and will be back in stock soon.
Firebolt1176 wrote:
Thu Mar 12, 2020 8:47 pm
I see that the uppers are in stock - any plans to release the proper T91 roll-marked lowers as well in the future?

Also, do you know roughly when you'll restock the T91 bayonet and carry handle?
Post Reply