New Member

New User Post Area. New User Please Follow the Rule Post Here First.

Moderators: blueeyedwolf, e292644

Post Reply
User avatar
Bull1923
I
Posts: 4
Joined: Mon Aug 26, 2019 6:43 pm
Country: USA
Location: Oklahoma

Mon Aug 26, 2019 6:51 pm

Been enjoying all the info. Joined up as I am about to purchase a T91 upper. Any advice, further info, guidance, suggestions would be welcomed and appreciated. Bull1923


User avatar
e292644
Site Admin
Posts: 387
Joined: Thu Apr 20, 2017 5:47 pm
Country: USA
Location: AZ
Contact:

Mon Aug 26, 2019 8:36 pm

Welcome!
User avatar
Arkane
C
Posts: 120
Joined: Tue Jun 20, 2017 12:35 pm

Mon Aug 26, 2019 9:13 pm

Welcome aboard! Advice wise as soon as you get it I'd pull the front sight post, screw in a cleaning rod and see if it is lined up with the rail. If not Warranty it for a canted sight block. If it passes that then the next thing I'd do is chuck up a 5.56mm chamber brush, on a rod in a drill, soak it in break free, and work the chamber a bit. These rifles tend to ship with really tight chambers and that has seemed to help on mine. Personally I run an anti-tilt H3 heavy buffer and POF tube on all my A1's for peace of mind. Others have reported no serious tilt scraping, but with my luck I'm not taking any chances!

I've put a few thousand rounds through these uppers so far and haven't run into anything that I'm unhappy with. Shoot the snot out of it!
User avatar
Bull1923
I
Posts: 4
Joined: Mon Aug 26, 2019 6:43 pm
Country: USA
Location: Oklahoma

Wed Sep 11, 2019 7:01 pm

Appreciate info. Thank you.
Post Reply