Ghost Gunner 3

$2 100.00
Out of stock
Product Details


Ghost Gunner 3 allows you to manufacture firearms with confidence and ease, in the privacy of your own home. GG3 removes material 5 times faster than GG2 and the new unibody construction provides greater rigidity, drastically improving finished part quality.

The custom spindle is powered by a specially designed closed-loop digital VFD, which sets a new standard in desktop CNC machining. GG3 ships with code to complete 80% AR-15, AR-308, M1911, and Polymer 80 frames frames. All existing jigs are compatible with GG3.

Product Details

Ghost Gunner 3 is a general purpose CNC mill that gives you the ability to finish 80% receivers and frames with ease, in the comfort of your own home.

Ghost Gunner 3 is a complete redesign based on the successes of the GG2. It uses a milled, precision unibody frame for sharply improved squareness and rigidity. Optical limit switches and pre-loaded, self-aligning ballscrews allow it to deliver advanced positional accuracy.

GG3 incorporates a custom motion-control board with a closed loop, digital VFD controller. The machine accepts g-code from most CAM post-processors, and supports tool diameters up to 8 mm (~5/16”).

Included with the GG3: A DD USB with all our latest software. ER-11 collet nut, 5/16″ allen wrench, 3mm ball-end allen wrench, 12mm wrench, 17mm wrench, 6′ USB A-B cable, 6′ three-prong power cable. Laptop not included.

Shipping is a flat rate of $100 in the United States.

Tech Specs

System Requirements
Windows 7+, Mac OSX 10.13+
Weight19Kg~42 pounds
X/Y/Z travel89/242/79mmDouble the GG2 build volume
X/Y/Z interior clearance116/299/162mmMeasurements with cover on
Peak Spindle Power375WOverload protection prevents exceeding
Continuous Spindle Power190WLong-term average, temperature limited. Can be exceeded.
Spindle speed3000-9000rpmVariable, closed loop. Can apply full power at any rpm.
Max Linear Velocity2600mm/min260% faster than GG2
Max Linear Acceleration250mm/s^28 times more than GG2
Spindle runout0.0009inMeasured on tapered collet, 1mm from tip
T-Slot Spacing40mmCenter-to-center
Table T-slots2QTYCompatible with 20 mm T-nuts
Collet systemER11Accepts tools up to 8 mm

Weight850 oz
Dimensions16 × 21 × 14 in

** Machine Only, Computer and 80% lower receiver not included **

*** DDCut Software Download ***

PLEASE NOTE: Ghost Gunner machines, lowers, frames, and other hardware and equipment are not currently available to persons outside the United States and they are not available to residents of and persons in the State of New Jersey or the State of New York, which criminalize possession of unregistered assault weapons. THIS PRODUCT IS ILLEGAL IN THE STATE OF NEW JERSEY AND THE STATE OF NEW YORK. THE PURCHASE OF “GHOST GUNS” OR “GHOST GUN” PARTS FOR ASSEMBLY IS UNLAWFUL IN NEW JERSEY AND NEW YORK. THE CONTENTS OF THIS WEBSITE ARE NOT INTENDED AND SHOULD NOT BE CONSTRUED AS AN ADVERTISEMENT OR OFFER FOR SALE OF “GHOST GUNS” AND “GHOST GUN” PARTS TO NEW JERSEY RESIDENTS OR NEW YORK RESIDENTS OR ANY PERSON IN NEW JERSEY OR NEW YORK.

Save this product for later